Home
Robert Sorby Turning Tools
Beal Buffing System
Pen Kits & Accessories
New Wave Sanding Supplies
Abralon Sanding Pads
Wood Turning Books
Pen Turning Classes
Finished Gallery of Pens
Contact Us Pen Turning
Product Reviews
Pen Turning Links
Pen Supplies Ordering Information
DC Fountain Pen Show
Pen Display Cases

Beal Buffing System

Wood buffing has been used by pipe makers for years to polish their work.  Not until recently has it been widely accepted and utilized by wood workers!  The buffing process is a very easy one and with the components below, it is made even easier!  (see technical advice below on wood buffing)

The Wood Buff Kit - $65.00

Consists of three 8" buffing Wheels with center bolts for quick change, combination 1/2"-5/8" Quick Change Adapter, one bar of Tripoli buffing compound, one bar of White Diamond buffing compound and one bar of Carnauba Wax.

 

NEW - Bowl Buff Kits

Each bowl buff kit contains a Tripoli, White Diamond and Carnauba Wax buff for a total of 3 buffs!  The different size buffs are shown to the left.

BWLKIT 2 - set of 3 - 2" bowl buffs - $35.95

BWLKIT 3 - set of 3 - 3" bowl buffs - $36.95

BWLKIT 4 - set of 3 - 4" bowl buffs - $39.95

Extra Tripoli Bar - $4.50

Extra White Diamond Bar $4.95

Extra Carnauba Wax Bar $5.95

 

 

Quick Change Adapter - $ 14.99

Adjusts to fit  1/2" - 5/8" diameter motor arbors.  Adapter comes with right-hand threads ONLY!

 

 

Wood Buffing using the Beal Buffing System:

1.  Sand your piece to at least 250 grit.  If the piece will not receive much handling or is an exotic piece (cocobolo, etc.) containing sufficient natural oil, you can proceed immediately to the next step.  For more durable results, apply an oil or varnish sealer first, allowing the piece to thoroughly dry.  Penetrating finishes such as MinWax Antique Oil™ , tung oil or Watco™ will furnish the best results.  However, varnish and with care, lacquer may also be used.  NOT recommended are vegetable-based oils such as linseed which may not dry thoroughly or shellac, which can be melted by the heat produced in the buffing system!  The wood buff system is designed to be used with a 1/3 HP motor with a recommended motor speed of 1725 RPM.

 

2.  Apply the Tripoli bar included in the kit to the all linen Tripoli Wheel and buff:  all buffing wheels are marked for your convenience.  Tripoli is the coarsest abrasive included in the kit and will leave a slight residue on the work. (pictured right)

 

 

3.  Next, buff your piece with the White Diamond compound applied to the combination linen and cotton White Diamond Wheel.  White Diamond is a finer, drier compound and will remove the residue left from step 2. (pictured left)

 

 

 

4.  Finally, apply the Carnauba Wax with the all cotton flannel Wax Wheel.   The beauty of the resultant finish is difficult to describe:  it is similar to the effect achieved with the multiple coats of lacquer, but is softer and deeper.  Since only the Carnauba Wax, an edible natural substance remains on the wood, buffing is particularly appropriate for small hand held objects such as bowls, pens, boxes and toys. (pictured right)

 

WARNING:  Be sure to wear an OSHA approved dust mask when you are buffing!  Particles in buffing compounds can irritate eyes, nose and skin.  Excessive inhalation of Tripoli particles can lead to serious lung disorders!

RETURN TO TOP OF PAGE

BG Artforms -  2189 Philip Drive - Bensalem, PA 19020  (888-717-4202)